Taskalfa 3500i

Gab

Senior Tech

Join Date: Aug 2015

Posts: 633
#1

Taskalfa 3500i

07-09-2022, 10:39 AM

At the bottom of the copypage about 5 cm the toner seems to spit. I can feel it with the tips of my fingers. I run drum refress1 and 2 , developer agittating with no result.
I noticed when making skyshots *(total blank) the toner at those areas is smooth as it is at the rest areas of the copy.
Any idea?
Tags: areas, making, noticed, result, toner
blackcat4866

Master Of The Obvious

Site Contributor
10,000+ Posts

Join Date: Jul 2007

Posts: 22695
#2

07-09-2022, 07:32 PM

Re: Taskalfa 3500i

It sounds like your developer is overtoning. A sample would be good. =^..^=

If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.

blackcat: Master Of The Obvious =^..^=
Comment

Comment