Re: COPYING TIMING TOO LONG
Have you checked to see that all of the paper trays are behaving this way (run something through the MP tray to compare)? Feed rollers may be worn out, separation pulley has flat spots.
COPYING TIMING TOO LONG
Collapse
X
-
Re: COPYING TIMING TOO LONG
Are you using OEM Kyocera toner or aftermarket compatible?Leave a comment:
-
Re: COPYING TIMING TOO LONG
Hi friends, kyocera taskalfa 1800 copying time is too lone while copying in multiple copies.(i.e while taking 10 copies in same matter first 2 copies are coming normal then machine runs for 10 to 15 seconds then another 2 or 3 copies coming out then the same delay process is repets) i changed thermister and fuser roller too but the same problum presist.Leave a comment:
-
Re: COPYING TIMING TOO LONG
i make the copies with orginel documents placeed in glass. its not printouts from computer.Leave a comment:
-
Re: COPYING TIMING TOO LONG
Just to be sure, when you say copying, is that to set a document on the glass or in the ADF and make a copy, or you printing something to the machine via a computer?Leave a comment:
-
Re: COPYING TIMING TOO LONG
Perhaps the toner level is getting low, and it goes into a toner add cycle. Does it display: "adding toner"?Leave a comment:
-
COPYING TIMING TOO LONG
Hi friends, kyocera taskalfa 1800 copying time is too lone while copying in multiple copies.(i.e while taking 10 copies in same matter first 2 copies are coming normal then machine runs for 10 to 15 seconds then another 2 or 3 copies coming out then the same delay process is repets) i changed thermister and fuser roller too but the same problum presist.
Leave a comment: