2552ci and 4052ci fusing unit

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • cmpelser
    replied
    Re: 2552ci and 4052ci fusing unit

    hi,
    you should be able to swop the pcb and the pressure roller is also a different diameter. swop both over and it should work.

    Leave a comment:


  • GIUBOSS
    started a topic 2552ci and 4052ci fusing unit

    2552ci and 4052ci fusing unit

    Hi guys, I would like to adapt, if possible, the working fusion unit of the 4052ci to the one of the faulty 2552ci. Any tips? Thanks
Working...