kyocera fs-2100 problem

[tullamore75]

Re: kyocera fs-2100 problem

Problem solved. Damaged dump of eeprom 24lc32.
Engine PWB

I am uploading a working dump.
FS_2100_24lc32.zip

[tullamore75]

Re: kyocera fs-2100 problem

do you have 24V power supply on YC19/ pin 18 and 3,3V on YC19/ pin 14?
Maybe engine pcb broken

There is a power supply of 24 volts on pin 18 and 3.3 volts on pin 14.
I think there is a short circuit somewhere.

[KYO_OEM]

Re: kyocera fs-2100 problem

do you have 24V power supply on YC19/ pin 18 and 3,3V on YC19/ pin 14?
Maybe engine pcb broken

[tullamore75]

Re: kyocera fs-2100 problem

проблем с високо напрежение
премахнете дуплексния модул, проверете/заменете печатна платка с високо напрежение
[ATTACH=CONFIG]62154[/ATTACH]

Replaced high voltage pcb. The problem remains.

[dalewb74]

Re: kyocera fs-2100 problem

due to the age of the printer, i would recommend buying a new one.

[KYO_OEM]

Re: kyocera fs-2100 problem

high voltage problem
remove duplex unit, check/ replace high voltage pcb
hvt 6th gen.JPG

[tullamore75]

Целият лист е на черни петна. Сменени dv-3100, dk-3100, платка с високо напрежение, pcr.[ATTACH=CONFIG]62153[/ATTACH]