Taskalfa 5003i 'Add paper in cassette 1 error

[Chlgmchjiru]

Hello friends... I have Kyocera Task alfa 5003i copier to repair. First all paper fiders not working. When i try to use MP feeder it takes the paper and jam at Registration roller. I gate it the Rigisration roller is not drive or not rolling. The i remove the white roller that with regisration roller. It's ok in MP feeder. But the problem is ... Trouble 1is... Cassette 1 shaow 'Add papper in cassette 1'. Trouble 2 is . Cassette 2 show 'Cassette 2 Failer' Trouble 3 is.. Registration clutch is not working. Plc hel me any one who have experiance.

[csliao]

Re: Taskalfa 5003i 'Add paper in cassette 1 error

Hello friends... I have Kyocera Task alfa 5003i copier to repair. First all paper fiders not working. When i try to use MP feeder it takes the paper and jam at Registration roller. I gate it the Rigisration roller is not drive or not rolling. The i remove the white roller that with regisration roller. It's ok in MP feeder. But the problem is ... Trouble 1is... Cassette 1 shaow 'Add papper in cassette 1'. Trouble 2 is . Cassette 2 show 'Cassette 2 Failer' Trouble 3 is.. Registration clutch is not working. Plc hel me any one who have experiance.

status / Job chenal mode， 10871087，use，U906，start，power off then on

[Chlgmchjiru]

Re: Taskalfa 5003i 'Add paper in cassette 1 error

status / Job chenal mode， 10871087，use，U906，start，power off then on

Thank!!!
what about regstration clutch not active?

[hnami]

Re: Taskalfa 5003i 'Add paper in cassette 1 error

Thank!!!
what about regstration clutch not active?

check pre registration sensor

[taskalfaman]

Re: Taskalfa 5003i 'Add paper in cassette 1 error

if you can 't solve this ,this is not the forum,
this is basics.
that is why evrytihng gets blocks due to Mc GYvers.

become a pro.