Hi Guys
I have a FS1118MFP that failed shortly after setup, during testing. It had about 30 or so on the meter reading. The main PCB was replaced to solve the problem, but now the meter misteriously jumped to over 3000. I removed all chips, DIMMS, and EEPROMS from the original main pcb and fitted it to the new, as indicated by the service manual when i fitted the new PCB. Does anybody know why it does this, or how to clear the counter?
Thank You for any suggestions and help
I have a FS1118MFP that failed shortly after setup, during testing. It had about 30 or so on the meter reading. The main PCB was replaced to solve the problem, but now the meter misteriously jumped to over 3000. I removed all chips, DIMMS, and EEPROMS from the original main pcb and fitted it to the new, as indicated by the service manual when i fitted the new PCB. Does anybody know why it does this, or how to clear the counter?
Thank You for any suggestions and help