a 4850w machine cuts the paper unevenly in all sizes. trailing edge is completly vanished and the leading edge is have more space. but not for all copies or prints , in 5 prints one will be ok , other 4 are having problem.
i replaced and interchanged the reg, pick up. feed clutches. no result.
i doubted about the cutter switch , which is located before the reg, roller.
it is not the normal switch . it is having some micro connections inside, i opened it and cleaned it, after cleaning first 10 copies are perfect. then again same problem, but now out of 10 copies more than 5 is ok.
the machine is nearly 6 years old, and produced more printouts. i already orderd the switch, it will reach me after 5 days. if any other solution is given from our guys, really apriciated.
i replaced and interchanged the reg, pick up. feed clutches. no result.
i doubted about the cutter switch , which is located before the reg, roller.
it is not the normal switch . it is having some micro connections inside, i opened it and cleaned it, after cleaning first 10 copies are perfect. then again same problem, but now out of 10 copies more than 5 is ok.
the machine is nearly 6 years old, and produced more printouts. i already orderd the switch, it will reach me after 5 days. if any other solution is given from our guys, really apriciated.