Can you Help?
I get a Message: Can not Staple due to Finishing error.
I get a Message: Can not Staple due to Finishing error.
-
-
check finisher for anything jammed, also go into service mode and run 906. -
Yes I agree, clear any jam and run sim 906 to reset the disabled mode. Print off a jam report and locate your problem.Grant me the serenity to accept the things I cannot change.
Comment
-
How do you get into service mode?Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLCComment
-
It's the same on almost all Copystar/Kyocera: select Copy screen, then 10871087If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Thanks Blackcat.Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLCComment
Comment