the machine is locked now can't do anything...
how can ı solve or reset the code ?
how can ı solve or reset the code ?
-
-
C6400 is a zero-cross error. That means that there is a phase problem AC from the wall. You can reset the error in sim U163, but that won't resolve the power issue that brought about the code. This is what the manual says about C6400:
1) Check wall outlet ground to neutral voltage. 2) Reseat YC4 @ engine PWB & YC10 @ PSU, 3) Repl engine PWB, 3) Repl PSU.
=^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
You can reset the error in sim U163... >>> the control panel locked >>> how can ı do that
2) Reseat YC4 @ engine PWB & YC10 @ PSU, 3) Repl engine PWB, 3) Repl PSU >>> please more detail...Comment
-
Power On with front door open.
Enter service mode: 10871087
close front door
enter on numeric keyboard: 163
Start
Execute
Start
when prompted power Off/On.
You are an enduser? =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
tnks for your help..........
enduserComment
-
This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from The Internet's largest collection of manuals
Paul@justmanuals.comComment
-
These zero-crossing errors are usually not big power problems. They are almost always caused when you have a temporary outage like from a storm. I always tell my customers to avoid this by shutting off the machine during an outage or a storm until it's stable, if possible.Comment
Comment