TX report displayed wrong destination.

jmaister

certified scrub

Site Contributor
500+ Posts

Join Date: Aug 2010

Posts: 755
#1

TX report displayed wrong destination.

03-15-2011, 12:13 AM

Unique situation where the destination on TTI & activity report didnt repeat the destination phone #, but just "02."

Is this because the receiving machine was not configured properly, or its being forwarded or going through PBX?

Idling colour developers are not healthy developers.
Tags: destination, displayed, pbx, phone, receiving, repeat, report, wrong
blackcat4866

Master Of The Obvious

Site Contributor
10,000+ Posts

Join Date: Jul 2007

Posts: 22997
#2

03-15-2011, 12:18 AM

Correct. The receiver transmits whatever TTI information that has been programmed, even if its just "02".

Some models of facsimile will not function unless some TTI data is programmed. =^..^=

If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.

blackcat: Master Of The Obvious =^..^=
Comment

Comment