Kyocera FS-C5030n Firmware Update

[copyguy1]

Re: Kyocera FS-C5030n Firmware Update

Make sure when flashing the firmware that it is not in a folder on your jump drive

[DWise]

Re: Kyocera FS-C5030n Firmware Update

Hello Dwise,

That's what i've done....
I did all like in the manual.

Grts

Did you update the firmware? Did your errors/problems go away?

[brecht2]

Re: Kyocera FS-C5030n Firmware Update

Hello Dwise,

That's what i've done....
I did all like in the manual.

Grts

[DWise]

Re: Kyocera FS-C5030n Firmware Update

After you log-in to the KDA website, go to the EEPROM/Firmware section. In the drop-down tabs, select the category of your printer and the printer model. You can verify the firmware version before downloading. If your current level is out-dated, download the new file.

[brecht2]

Re: Kyocera FS-C5030n Firmware Update

I have the same issue with a 5015!!! Anybody???

[Lazuli]

I've got a Kyocera FS-C5030n displaying "Supervisor Mode" and "Parallel waiting". The printer displays this message from powwer on and will not do anything else; none of the buttons will work. I understand that this may be fixed with a firmware upgrade to the system and engine but I cannot find these upgrades. Does anyone know where to get them please? Or some idea how to get this machine working again.

Many thanks
David