cfooo

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Metalvoc
    replied
    Re: cfooo

    Originally posted by kkendric
    On the TASKalfa 250Ci series the white and black USB cables connect to the Main PWB not the Engine board
    Yes, the main board. I think that's what I said... I plugged - I mean, my friend - plugged the usb cables into the main pcb wrong. yeah, that's it!

    Leave a comment:


  • kkendric
    replied
    Re: cfooo

    On the TASKalfa 250Ci series the white and black USB cables connect to the Main PWB not the Engine board The engine board is mounted behind the main PWB. The main board is also labled as to where each of these connectors is to be connected. Locking up at start up screen can be caused by almost anything that interrupts the data between main board and the operation unit. The F-DIMM's, usb cables, etc.

    Leave a comment:


  • jmaister
    replied
    Re: cfooo

    seriously?

    arent they just cables?

    Leave a comment:


  • Metalvoc
    replied
    Re: cfooo

    That is good to know. Thanks! I also noticed... ummm, I mean a friend of mine told me... that if you switch the black and white usb cables that plug into the engine pcb on a 250ci series, the copier freezes at the welcome screen.

    Leave a comment:


  • blackcat4866
    replied
    Re: cfooo

    Thanks djs. It's added in.

    Leave a comment:


  • JustManuals
    replied
    Re: cfooo

    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from

    Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

    Leave a comment:


  • djs
    started a topic [Dead] cfooo

    cfooo

    taskalfa 305 freezing on WELCOME screen. Replace black cable between op panel and main board
Working...