MY Kyocera Mita PointSource Xi8020 IS SHOWING CHECH WASTE TONER TANK
I bought some manual from one store, i have some many problem which i can not be able to solve since all this days, like the one that i bought last on xi3648/8020 [Service (repair) manual for Kyocera Mita PointSource Xi8020]my machine is coping plain white, and gives me call for service c550, i remove the drum and clean the toner at the sensor,i also check the manual that causes the entirely white[no image] i replace the wire,so i now tie it back as i on the machine, the machine is showing me checked waste toner tank, i removed the waste toner, i put it back, it also showing the same things, i washed the toner tank is still showing me the same things, i service the sensor too, the same things, i also go through the manual where they talk about the that on figure 3-1-21,I AM NOT CLEAR[i did not understand it please] can you explain to me well so that i can solve the problem of check waste toner tank and NO IMAGE.
Sir i will be happy if you can give me the support and the solution to this my problem
Sir i will be happy if you can give me the support and the solution to this my problem