TA 4500i + DF 770 jam 6301

[mascara]

After fw uprgade every copy jams with code 6301 in left finisher tray. With upper output i havnt problem. I check all sensors and motors from service. Also I do U906, but it didnt solve this problem. Copy count 48k. Have any ideas?

[flimmer]

Re: TA 4500i + DF 770 jam 6301

DF middle eject sensor (DFMES) does not turnon within specified time of DF paper entry sensor

(DFPES) turning on (1000-sheet finisher).

[mascara]

Re: TA 4500i + DF 770 jam 6301

I have service manual. Today i doing downgrade firmware. Problem solved. 3.03>>>2.03

[eddie110171]

Re: TA 4500i + DF 770 jam 6301

You sould be upgrading to 3.06, 3.04 had fixes for the DF 770. Make sure the finisher is connected when upgrading firmware too.

[mascara]

Re: TA 4500i + DF 770 jam 6301

I dont have 3.06, because my access only for dealer ftp... I think he upload new firmware after 2-3 months((( He is slow-minded. Can you give me 3.06?

[eddie110171]

Re: TA 4500i + DF 770 jam 6301

PM me with your email.