FS -1128

[Kidaver]

Re: FS -1128

I would try it with both on and off.....and you are dealing with Win 7 so yes your brain is functioning properly...Win 7 is just fickle like I said...you may also have to add a username and login...as I've said I've seen some work without it and some will not work without it...

[copiman]

Re: FS -1128

Thanks Kidaver. You have been extremely helpful. I think I'm ready to give it another shot.

[Kidaver]

Re: FS -1128

Good luck....the thing with SMB...it's rather easy to set up....but difficult to pin point problems when they happen because there are so many factors involved....Hell I still have an 1128 at a law office with a PC with Win XP that me and 2 other techs have never figured out why it won't scan to SMB lol....

[copiman]

Re: FS -1128

Well, I got it. The trick was to set up user account with password. What a long drawn out deal. The good thing is I did learn a few things and got fimiliar with Command Center, so I'm thakful for that. Thanks everyone.

Special thanks to Kidaver for sticking with me on this.

[Kidaver]

Re: FS -1128

Glad you got it figured out....it's pretty much the same on Kyocera machines unless you get into a few older models where you need Scanner File Utility and such....hopefully you'll never have to deal with it...customers cause more problems with that set up than the set up itself...

[copiman]

Re: FS -1128

You got that right. Had a KM 2530 a few months back that the local kyocera dealer could not set up scanning. They isntalled it years ago and had it scanning. Customer had hard drive crash on PC. The dealer could not make it work. I guess they lost their tech who new how to do it. They said it was a firewall blocking it. Customer called computer support company and they said the same thing. With the help of the techs on Copytechnet, I was able to get them scanning.

It had 2 NICs. That threw me for a loop.

[Kidaver]

Re: FS -1128

I think I spent about an hour trying to figure out why scanning wasn't working on a KM-C2525 because that machine has 2 NIC's as well....and they discreetly hide one of them lol...

[Barış KURT]

Re: FS -1128

i have seen this problem.on win xp scan to smb
username line write "user" password line is blank after login success.

[blackcat4866]

Re: FS -1128

[ATTACH]20574[/ATTACH]Thanks everyone for helping. Will go back out and attempt it again. I have attached a document someone posted on here. Can you take a look at it under Address Book Contacts-Edit. Under SMB, the host name shows the IP address with the port number following it and : between them. Is this correct?

You've actually doubled up on the port designation: 192.168.2.3:445:445
Remove the :445 from the IP

Otherwise everything here looks fine. The things I can't see are the folder share properties. =^..^=