[Jamming] J0501 with TA-5550ci

[kaborwen]

Hi all! I have J0501 with TA-5550ci. I get it up to 220 times for 110 000 total count. After clean all pulley, it's still. I need help to fix it please. If there are services bulletin about it , I will be glad to get them. Thx all.

[copymech]

The feed tires often wear out early and need frequent replacment.

[tonerlung]

Re: J0501 with TA-5550ci

Hi all! I have J0501 with TA-5550ci. I get it up to 220 times for 110 000 total count. After clean all pulley, it's still. I need help to fix it please. If there are services bulletin about it , I will be glad to get them. Thx all.

0501 jams.jpg

[daveh12]

The Sep rollers on the pick up assemblys wear down very fast 40k approx. There are modified rollers now out, harder wearing. There are also modified springs out for the assemblys that relieves the tension slightly on the Sep rollers. This helps but it only improves life of the rollers to about 100k. Then they have to be changed.

[kaborwen]

Re: J0501 with TA-5550ci

Thanks all,
I Will replace the rollers.
Best regard.

[FINGERS123]

Re: J0501 with TA-5550ci

There is a new update to the troubleshooting guide you can find it on KDAconnect and it talks about that jam codee

[JustManuals]

Re: J0501 with TA-5550ci

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:

http://www.justmanuals.com

Paul@justmanuals.com

[kaborwen]

Re: J0501 with TA-5550ci

There is a new update to the troubleshooting guide you can find it on KDAconnect and it talks about that jam codee

I do not have KDAconnect account. Can you help me with it?
I replace the pulley so now it's seems to be ok.