KYOCERA KM 2050

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • brunot
    replied
    Re: KYOCERA KM 2050

    Originally posted by FINGERS123
    You want to make sure that you have power leaving the main power supply and returning to the main power supply. Once you rule that out then you can focus on another area, but it sounds like your power supply is bad.
    Ok,i've downloaded the service manual and found the power source PCB block diagram. I will check if all voltages are good.
    Thanks

    Leave a comment:


  • FINGERS123
    replied
    Re: KYOCERA KM 2050

    Forget turning off all the power save function thats not gonna stop the machine from going into automatic low power mode. If all of your voltages are good on main power supply then you will have to check the service manual and find out which board in the machine controls this and replace it. Other then that call you tech rep or sell your customer a new machine.

    Leave a comment:


  • MR Bill
    replied
    Re: KYOCERA KM 2050

    I think I would just go into user settings and turn off all power save functions . Then it will not turn off op panel. Turn down fuser tempature and forget about it.

    Leave a comment:


  • FINGERS123
    replied
    Re: KYOCERA KM 2050

    You want to make sure that you have power leaving the main power supply and returning to the main power supply. Once you rule that out then you can focus on another area, but it sounds like your power supply is bad.

    Leave a comment:


  • brunot
    replied
    Re: KYOCERA KM 2050

    Originally posted by FINGERS123
    Did you check your voltages on the main power supply?
    NO,why?

    Leave a comment:


  • JustManuals
    replied
    Re: KYOCERA KM 2050

    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:

    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

    Leave a comment:


  • FINGERS123
    replied
    Re: KYOCERA KM 2050

    Did you check your voltages on the main power supply?

    Leave a comment:


  • brunot
    started a topic [Misc] KYOCERA KM 2050

    KYOCERA KM 2050

    Dear All,
    I need help to resolve this problem:
    When the machine is engaged in Auto Sleep mode or manually engaged,only the Main Power indicator is lit, all other indicators are off.
    When POWER key is pressed,power is not restored,copier,printer,scanner or fax functions are disabled,the operation panel is freezed.
    As a result the Network Scanner kit is disabled.
    Please adviced
    Thanks and regards
    Bruno
Working...