If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Having an issue with Jam 12 code no paper feed from PF750 and PF75. The feed clutches are firing in MM, feed switch 3 is operational in MM. Replaced clutches anyhow, issue still there. Any suggestions would be great.
Take a look at the paper pickup roller drive for the left stack.The plastic bracket that holds the rollers tends to break. Also check the film guide that sits between yellow and blue tires it tends to tear causing jams. Goodluck!!
Comment