I have a fs-6025 and printing images from Mac on USB to printer has been fine up until now, but have been noticing marks and black patches on prints. Images here:
Any idea why? The paper is thin, around 70gsm. Could this be the reason? The toner is half full.
When I test with 80gsm copier paper and use just the photocopy/glass scan the problem doesn't seem to occur.
Thanks
Simon
Any idea why? The paper is thin, around 70gsm. Could this be the reason? The toner is half full.
When I test with 80gsm copier paper and use just the photocopy/glass scan the problem doesn't seem to occur.
Thanks
Simon