Mita 3010

[antone]

How do techs get into tech modes...how is Doc feeder get adjusted!! Never work on these before!!!

[laitang]

Re: Mita 3010

To enter:
- Press the status/Job cancel key
- Enter “10871087” using the numeric keys.
- Enter the maintenance item number using the cursor left/right keys or numeric keys.
- Press the start key.

To exit:
Enter “001” using the cursor left/right keys or numeric keys and press the start key.


Adjustment Document feeder:
TASKAlfa_3010i_Maintenace_Mode.JPG

[Warstg_20]

Re: Mita 3010

[ATTACH=CONFIG]27918[/ATTACH]

wow