Hi,
A previous tech found out that MP lift is stuck in the lower position and bypass is not feeding but could not figure it out why, so I am going there tomorrow and thought to check if anyone had this before or can point to the right direction.
There is no tech bulletin addressing this error and according to the service manual the reg sensor does not turn on during paper feed from MP tray.
Thanks in advance!
A previous tech found out that MP lift is stuck in the lower position and bypass is not feeding but could not figure it out why, so I am going there tomorrow and thought to check if anyone had this before or can point to the right direction.
There is no tech bulletin addressing this error and according to the service manual the reg sensor does not turn on during paper feed from MP tray.
Thanks in advance!