Has one had the registration sensor out of the machine?
I have one were the Actuator is loose, i have realigned at present but i am unable to get the unit out. I removed all the front section as i believed that would give me enough clearance to move the reg roller as there is 2 screws behind the metal roller.It looks like the rear of machine needs to be removed but hesitant to start to remove board etc. with getting the machine working again,but sure how long my fix will hold out.
So thought i would ask if anyone is aware of a easy way of getting the section outScreenshot 2015-08-02 17.55.54.jpg
I have one were the Actuator is loose, i have realigned at present but i am unable to get the unit out. I removed all the front section as i believed that would give me enough clearance to move the reg roller as there is 2 screws behind the metal roller.It looks like the rear of machine needs to be removed but hesitant to start to remove board etc. with getting the machine working again,but sure how long my fix will hold out.
So thought i would ask if anyone is aware of a easy way of getting the section outScreenshot 2015-08-02 17.55.54.jpg
If at First you don't succeed remove all evidence of ever trying!