Hi all
Have a Muratec f-305 that was calling for toner. Customer replaced the Toner (oem) twice and replace toner message is still on.
I checked the reset fuse and both were blown...So my question is..what is the value of the fuse and is there a hard or soft reset that I can do .
Assuming the toner fuses were good when the toner was replaced am I looking at a pcb issue.
Thanks
Have a Muratec f-305 that was calling for toner. Customer replaced the Toner (oem) twice and replace toner message is still on.
I checked the reset fuse and both were blown...So my question is..what is the value of the fuse and is there a hard or soft reset that I can do .
Assuming the toner fuses were good when the toner was replaced am I looking at a pcb issue.
Thanks