My Oki C9650, when i power on show me Fatal Error 256, i not know this error, in service manual is not information for it.
-
-
Nothing in my spreadsheet. Do you get any clues from what operation you're trying to do when the error occurs?If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Paul@justmanuals.comComment
-
when i power of, in display appear "initializing" but 2 sec after, appear 256:fatal error, and the printer continues rotating the rollers, the fusor it reaches high temperatures. I have the OKI C9650 service manual but doesn't mention anything of this error.
I verify Ram memory, Hard disk, remove wires/conectors to pcb and reconect all, inspect development units, transfer, leds, paper's jam, fusorComment
Comment