Matching user name with Equitrac ID

[Guest]

Hi there,

I need help here...
I have been trying to integrate SAP printing with Equitrac.
Here is what I have found out so far but unfortunately, I am still stuck.

On SAP end, they are able to place the user name in the job title. (Please see attachment.)
Hence, I thought of using EQXLPD to capture the user name and match it with Equitrac user ID. The user name and Equitrac user ID is different. However, I was told that only the owner properties, in this case SYSTEM, can be modified by EQXLPD.

Next, I thought of adding the init string in the SAP print initialization, which will look like:
# enter PJL mode and switch to PCL language
\e%-12345X@PJL\r\n
@PJL SET HOSTLOGINNAME="$(BENUTZER)"\r\n
@PJL ENTER LANGUAGE=PCL\r\n
# reset
\eE
In the Follow-You Printing, you can retrieve the user name from PJL setting HOSTLOGINNAME. However, this user name is different from the Equitrac user ID. So, I have no idea how to match it together.

Of course, the clear way is to use LOCL but the organization needs to go through a print server and not by local printing.

If anyone has any idea on workarounds to this issue, I am all ears and I need help desperately.

Thank you.

[User Name]

Why did you post this in all the copier forums?

[fryboy]

The reason is because this is not relating to copier or hardware. The issue lies on system.
Besides, I was really looking for help.
I hope the forum will not mind.
Thank you.

[jonezy999]

The reason is because this is not relating to copier or hardware. The issue lies on system.
Besides, I was really looking for help.
I hope the forum will not mind.
Thank you.

The forum does mind mate, especially people who use the correct forums to post their problems or solutions, only to be flooded out by a greedy I need this, I need that, I just joined this site for my own benefit and to flood the forums with crap, person like yourself.