Hold Scan destination after job Ricoh MPC2503

[omorales]

There is an option in the System Settings to hold settings after scan job is completed, but this seems to hold the file name and other settings, but not the actual destination.

[sandmanmac]

Re: Hold Scan destination after job Ricoh MPC2503

Scanner SP Mode: 1012 (User info Release)
1= no
0= yes

* Note: For whatever reason, The setting in the manual for this machine is the opposite of the setting for previous models, so I'd say whatever it's set at , set it to the other one

[slimslob]

Re: Hold Scan destination after job Ricoh MPC2503

I think what you are looking for is in Scanner SP. SP 1012 User Info Release. Change to 1.

[slimslob]

Re: Hold Scan destination after job Ricoh MPC2503

Scanner SP Mode: 1012 (User info Release)
1= no
0= yes

* Note: For whatever reason, The setting in the manual for this machine is the opposite of the setting for previous models, so I'd say whatever it's set at , set it to the other one

You posted while was confirming the SP setting in the manual.