Aficio MPC 3000 " You don't have privileges to use this function"

[copier tech]

Re: Aficio MPC 3000 " You don't have privileges to use this function"

Press yellow, 1,4,3, stop, then hold stop

Sp5846-46 This will reset the default admin log in but it will also clear the address book.

[tamboknon]

Re: Aficio MPC 3000 " You don't have privileges to use this function"

authentication failed... how can I reset the admin in the service mode Sir?TIA

[gear13z]

Re: Aficio MPC 3000 " You don't have privileges to use this function"

press User tools> before going to system settings, press the login/logout button on the rightside of control panel, just above the simplified display, below main power button, then you can see the login menu. username-admin, password-leave it blank or if not working type password.

[tamboknon]

Re: Aficio MPC 3000 " You don't have privileges to use this function"

Sir I press User tools>System Setting>Administrator tools>Administrator Authentication Management and "You don't have privileges to use this function" still appears. I think I'm the 3rd customer engineer who handle this unit in our office.

[slimslob]

Re: Aficio MPC 3000 " You don't have privileges to use this function"

Login as the administrator. Default is admin and leave password blank. It is the same credentials you use in WIM.

[tamboknon]

Hi Sir, Just want to ask how to clear or reset this " You don't have privileges to use this function. Because I will reconfigure the IP ADD. TIA