Mp3353

[Lanierman]

Dog ear on duplex and jam in bridge unit

[TonerMunkeh]

Re: Mp3353

Duplex RTB.pdf

[Lanierman]

Re: Mp3353

[ATTACH]33328[/ATTACH]

Done the rtb but it still jam after exit unit

[TonerMunkeh]

Re: Mp3353

Does it do with with all paper types and all directions of feed? IF you put a small tippex mark on the exit rollers do they visibly turn? Has the small actuator on the duplex gate pawl been broken off?

[Lanierman]

Re: Mp3353

Does it do with with all paper types and all directions of feed? IF you put a small tippex mark on the exit rollers do they visibly turn? Has the small actuator on the duplex gate pawl been broken off?

I need to check with other paper
the actuator have been change and tested on another machine
once the bridge unit is out there is no dog ear or jam on duplex

[slimslob]

Re: Mp3353

Can you tell us what the jam code is?

[HDSB]

Re: Mp3353

file down the plastic so the inverter junction gate opens wider - problem solved!

[Lanierman]

Re: Mp3353

file down the plastic so the inverter junction gate opens wider - problem solved!

That a good idea will try

[Lanierman]

Re: Mp3353

Can you tell us what the jam code is?

Jam code is 21 and 22 bridge junction

[Lanierman]

Re: Mp3353

Have replace exit and reverse junction gate but it still cause dog ear
and even the gate pawl as per bulletin
the machine is fine without the bridge unit