Printing to a SOP device without optinal WIFI

[tonnerboy]

Hello.

I find some moth ago a post that explain the possibility to open WIM with na expecific port. I tried that and it woked fine and even tested it printing to the device without the optional IEE 802.11 successfully...

I can not find that post guys... I am so sorry... can someone help me please?

I am trying to print to a SOP device and I am not being able to perform that...

[mikadonovan]

Re: Printing to a SOP device without optinal WIFI

If I understand correctly, disable 802.11 authentication for internet. User tools>System settings>Interface settings>scroll to page 2 for 802.11.

[tonnerboy]

Re: Printing to a SOP device without optinal WIFI

I apologize that I have not explained myself in the correct way.

In the few months ago I found a post here that was very useful.
In this post it was explained how to access the WIM through the IP of the panel. For this purpose we needed to use an specific port.

Over the course of testing I did notice that it was also possible to print through the IP panel. (Somehow there is a connection between the panel and the controller).

I'm trying to implement this functionality and I'm not getting and I can not remember which port was used to open the WIM (for instance http://192.168.1.25:"something")

I need to find that post... and I am not finding it. I need help please.

[tonnerboy]

Re: Printing to a SOP device without optinal WIFI board

Found it!!!!!!!!

http://www.copytechnet.com/forums/ri...-set-up-2.html