Hello<br />
<br />
Saturday we installed the first MPC3004 with SOP....everything ok, the only problem is the NFC print function via Smart Device Connector, if i select NFC authentication after the beep on my phone "wrong data" is displayed......the NFC tag was supplied with the machine.Now i'm wondering if we have to program the chip first, and if yes....how.....?<br />
<br />
Thx
Sorry for the double post.. But the other one was wrong because of the print symbols.... Thx slimslob!
Inviato dal mio GT-I9300 utilizzando Tapatalk
<br />
Saturday we installed the first MPC3004 with SOP....everything ok, the only problem is the NFC print function via Smart Device Connector, if i select NFC authentication after the beep on my phone "wrong data" is displayed......the NFC tag was supplied with the machine.Now i'm wondering if we have to program the chip first, and if yes....how.....?<br />
<br />
Thx
Sorry for the double post.. But the other one was wrong because of the print symbols.... Thx slimslob!
Inviato dal mio GT-I9300 utilizzando Tapatalk