c8002 with sc442

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • T911
    Senior Tech

    500+ Posts
    • Jun 2007
    • 628
    #1

    c8002 with sc442

    can't get rid of this code. replaced lift motor and lift home sensor any ideas thanks
    Tags: None
    • semi
      Trusted Tech

      100+ Posts
      • Sep 2008
      • 192
      #2
      Re: c8002 with sc442

      You need to replace this motor D1361212 DC Motor ON/OFF TRANSFER ASS'Y
      It's buried under the magenta PCDU drive ass'y

        Comment

        • Itanic
          Technician

          50+ Posts
          • Dec 2014
          • 59
          #3
          Re: c8002 with sc442

          Did one of these today! Starting to see more :-(
          As semi says D136 1212 is a modified motor inc wormdrive. The service manual does not show the location of this motor or how to change it! Managed to locate / workout from the parts list!
          There is a recent RTB / TSB for this issue when they issued the newer modified motor part RTB No. RD135168a
          A previous thread on the forums mentioned replacing the other 2 gears inside the gear casing but now the new motor is available i dont see the point of replacing those anymore!
          I took a photo to show my boss (attached)... Takes about an hour or so to get it done.. need to remove the iob, 2 black plastic fan ducts (1 of which is behind a metal frame runing horizontally and has wiring loom attached)..
          Then the itb lift motor casing is a black plastic case with two screws..20161117_150116 (Small).jpg

            Comment

            Previous template Next
            Working...