MPc3502 ghost/blurry trail edge image

[tufbnme]

This MPc3502 is blurring and giving background on the trail edge of legal paper. Doesn't do it on letter size paper. In the past it has always been a fuser issue. I have replaced the sleeve assembly and pressure roller, cleaned the fuser entrance guide but the problem has not changed. Saw a bulletin stating that it it may be an exit motor.
Just checking to see if anyone has had this and what was the cure.
Thanks
Happy New Year

[slimslob]

Re: MPc3502 ghost/blurry trail edge image

Any reason why you posted this twice?

[tufbnme]

Re: MPc3502 ghost/blurry trail edge image

Yes, computer glitch but it does not pertain to the question. Thanks for the help

[Tonerbomb]

Re: MPc3502 ghost/blurry trail edge image

This MPc3502 is blurring and giving background on the trail edge of legal paper. Doesn't do it on letter size paper. In the past it has always been a fuser issue. I have replaced the sleeve assembly and pressure roller, cleaned the fuser entrance guide but the problem has not changed. Saw a bulletin stating that it it may be an exit motor.
Just checking to see if anyone has had this and what was the cure.
Thanks
Happy New Year

Been there and fought that issue, mostly on 11x17. Changed the exit motor to make it go away....................

[kannuki2]

Re: MPc3502 ghost/blurry trail edge image

what's the part number for the exit motor?

[davel]

Re: MPc3502 ghost/blurry trail edge image

In the parts manual, dead thread.