If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
try it
worse that can happen is it codes out...
I remember mixxing up the 27cpm b/w OLDER series UFR and the rollers were a different thickness
and would blow fuser codes...
There were 2 different fusing units that have been used with the 1500. The original unit and the RoHS compliant unit. The part number for the RoHS compliant unit is exactly the same as for the 2018. The part number for the hot roller is the only change.
Comment