how to convert mp4001 to 5001

[Butrus]

Re: how to convert mp4001 to 5001

And what makes you think we have done that. This not the first time we've seen this question.

Well....try doing that(comparing parts manual) of Af1060/75 model
I bet it is similar with others...not all I reckon...some definitely....
Its tottaly doable with one little change on mentioned model

[Lagonda]

Re: how to convert mp4001 to 5001

Doesn't it ever occur to them that if all it takes to speed up a copier is a flick of a switch the OEM would only stock one model then sell you the secret to make it go faster? i.e the HP way of doing things.

[slimslob]

Re: how to convert mp4001 to 5001

I would start by comparing parts manuals
Often interesting results occure....

And what makes you think we have done that. This not the first time we've seen this question.

[Butrus]

Re: how to convert mp4001 to 5001

I would start by comparing parts manuals
Often interesting results occure....

[slimslob]

Re: how to convert mp4001 to 5001

The cost of the parts exeeds the value of the machine.

Surprise Surprise Surprise

[Michael Craig]

Re: how to convert mp4001 to 5001

The cost of the parts exeeds the value of the machine.

[jonhiker]

Re: how to convert mp4001 to 5001

well at least he didnt ask how to make a color copier into a b/w...........

give him a box of color crayons....

[fuwei2422]

Re: how to convert mp4001 to 5001

first : CTL
sec:BICU

[slimslob]

Re: how to convert mp4001 to 5001

5907 changes your model....but not the speed

If I remember correctly, it only allows you to change make. It will not allow selecting a model that does not correspond to the speed identified by the serial number.

[keithxxiii]

Re: how to convert mp4001 to 5001

5907 changes your model....but not the speed

[chand226]

Re: how to convert mp4001 to 5001

well at least he didnt ask how to make a color copier into a b/w...........

haha

[fshead]

Re: how to convert mp4001 to 5001

well at least he didnt ask how to make a color copier into a b/w...........

[slimslob]

Re: how to convert mp4001 to 5001

With all the things that you are going to have to take off an existing 50 ppm machine why not just use it.

[fshead]

Re: how to convert mp4001 to 5001

easy>>
a sharpee that can turn the 0 to 1.................

I always get a kick with these "Young Frankensteins"....

[slimslob]

Re: how to convert mp4001 to 5001

[QUOTE = chand226; 700490]如何將mp 4001轉換為5001
並將mp 4000轉換為5000 [/ QUOTE]
更換前門蓋的型號。（把前門蓋的型號更換就可以了）

Translation:
Replace the model of the front door cover. (Replace the model of the front door cover)

This will not change the speed of the machine. The model is also on the serial number plate. If you want a 50 ppm machine you need to buy one. If you really want to try, you will need to replace the controller board and the BICU. You will also need the front door and back cover with serial number from a 5001.