Ricoh mpc3002 color ajustment issue

[fadsamniote]

Hello everyone ...
I got this color issue on RICOH MPC3002 when ajusting the color on "Maintence" setting ... What it could be ?
Allready changed ITB and PCDU's , Cleaner laser and lens optic ...

IMG-20180628-WA0003.jpg

[copier tech]

Re: Ricoh mpc3002 color ajustment issue

Looking at your print sample I cant see what issue you have?

[keithxxiii]

Re: Ricoh mpc3002 color ajustment issue

Looking at your print sample I cant see what issue you have?

the same thing i was afraid to ask

[muhammadreza]

Re: Ricoh mpc3002 color ajustment issue

Hello everyone ...
I got this color issue on RICOH MPC3002 when ajusting the color on "Maintence" setting ... What it could be ?
Allready changed ITB and PCDU's , Cleaner laser and lens optic ...

[ATTACH=CONFIG]40725[/ATTACH]

i dont see any problem in your color can you highlight the problem ?

[logrady2331]

Re: Ricoh mpc3002 color ajustment issue

I think he's talking about the gradation pattern.

[logrady2331]

Re: Ricoh mpc3002 color ajustment issue

I've seen it before and fixed it with a reset of.....somewhere in the 5's. Reset then run gradation again. There's a post on this issue somewhere in this forum but it's been a bit.

[Andyboachie]

Re: Ricoh mpc3002 color ajustment issue

I've seen it before and fixed it with a reset of.....somewhere in the 5's. Reset then run gradation again. There's a post on this issue somewhere in this forum but it's been a bit.

I don't think you'll find any problem when you make a copy.

[Michael Craig]

Re: Ricoh mpc3002 color ajustment issue

I suggest you clean your ID sensor array.

[StephenB]

Re: Ricoh mpc3002 color ajustment issue

If you "restore" the maintenance adjustment to the previous setting, does it fix the problem ?

I have that same problem, have yet to find a solution.

[adoug]

Re: Ricoh mpc3002 color ajustment issue

Try resetting the printer application in service mode think it's 5-801-7 and try ACC again

[ridgemill]

Re: Ricoh mpc3002 color ajustment issue

Had the same issue with a 3502, tried resetting Printer and Copier applications to restore factory ACC, as well as using previous ACC settings.

Tried boards, laser, ITB and PCDUs.

In the end, we used another machine's ACC page and never had the problem come back. Couldn't pin it to any one solution, so best to try the easier and cheapest first.