Ricoh MPC 3003 K Drum

[steve1973]

Re: Ricoh MPC 3003 K Drum

Problem sorted, thanks to all who posted - removed Y/M/C dev units, fuser and ITB assembly, could then see much better especially through right door, drum was indeed not locating correctly so turned it slowly until it engaged with drive gear, helping it locate from both ends made a difference too, machine now working fine, thanks again - some top people on this forum

[Mark Bbb]

Re: Ricoh MPC 3003 K Drum

Duhhhh damn Must have been wore from spreading gravel that day.. yeah either a door open or a lever disengages the belt (up or down) he got the drums out.. hopefully did't muck the belt up..

OPEN all doors.. look for a lever around the ITB area.. ( might even be diagrammed on the door sticker ) hmmm IS the BELT OUT NOW? follow door instructs...
have you looked at service or even USER guide?

Be carrefull with this belt, it's damaged before you even know it!