If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
MP3353 does not have toner recycling, are you meaning toner inlet?
Actually it does. I have had to remove paper dust bunnies from a lot of them. Transport coil across the top of the upper PCU moves toner from the cleaning blade to the front of the PCU where it drops back to the development unit. The dust bunnies will clog the opening at the front.
Did you recently bought it from second hand market with this problem on it OR did you sell it at a customar some years ago and this problem recently occure?
Comment