c6003, c6004 pcu

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mikadonovan
    Senior Tech

    Site Contributor
    2,500+ Posts
    • May 2008
    • 2936

    c6003, c6004 pcu

    Hi, All. I hope your day is going well. Quick question: Can A MP C6003 PCU be used in a MP C6004? Dev units are noticeably different, pcu looks like it may work?
    NEVER ASSUME ANYTHING
  • anothertech
    Service Manager

    Site Contributor
    1,000+ Posts
    • Nov 2007
    • 1715

    #2
    Re: c6003, c6004 pcu

    I use the 04 drums in the 03's, they are a little less expensive. Slides right in with no mods required.

    I have never tried using an 03 drum in an 04.

    Comment

    • Athlontini
      Trusted Tech

      250+ Posts
      • Jun 2012
      • 269

      #3
      Re: c6003, c6004 pcu

      I have put 03 PCU's into 04 machines, so it will work, but my understanding is that the new 04 PCU's are actually cheaper, so my dealer is only ordering those PCU's going forward.

      Comment

      • copier tech
        Field Supervisor

        5,000+ Posts
        • Jan 2014
        • 7931

        #4
        Re: c6003, c6004 pcu

        Are the black & colour still a different design?
        Let us eat, drink, and be merry, because tomorrow we may die!

        For all your firmware & service manual needs please visit us at:

        www.copierfirmware.co.uk - www.printerfirmware.co.uk

        Comment

        • UCPrint
          Technician
          • Oct 2012
          • 24

          #5
          Re: c6003, c6004 pcu

          Hi guys,
          Just jumping on this thread, I'm having a nightmare with black streaks on MPC5503's and was also wondering about compatibility with other models. So far we have been refurbing PCU's with new lube, blade, charge and cleaning, but seem to get re occuring image quality issues when doing a heavy run so looking to resolve with a genuine unit swap if possible.
          Does the c6004 unit work without any mods and are they interchangeable between different colours and mono?
          TIA

          Comment

          • mga
            Copier Technician

            Site Contributor
            1,000+ Posts
            • Dec 2010
            • 1393

            #6
            Re: c6003, c6004 pcu

            Originally posted by UCPrint
            Hi guys,
            Just jumping on this thread, I'm having a nightmare with black streaks on MPC5503's and was also wondering about compatibility with other models. So far we have been refurbing PCU's with new lube, blade, charge and cleaning, but seem to get re occuring image quality issues when doing a heavy run so looking to resolve with a genuine unit swap if possible.
            Does the c6004 unit work without any mods and are they interchangeable between different colours and mono?
            TIA
            Rebuild kits are rubbish and a complete waste of time you can use the latest mpc3504-6004 Black pcu and it will fit in bk & colour slots and fit the 03 series
            Regards Mark

            FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

            RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

            https://copierservices.simdif.com

            Comment

            • copier tech
              Field Supervisor

              5,000+ Posts
              • Jan 2014
              • 7931

              #7
              Re: c6003, c6004 pcu

              Originally posted by mga
              Rebuild kits are rubbish and a complete waste of time you can use the latest mpc3504-6004 Black pcu and it will fit in bk & colour slots and fit the 03 series

              I agree the rebuild kits don't last.

              However the black & colour PCU look different so how can you fit a black as colour?
              Let us eat, drink, and be merry, because tomorrow we may die!

              For all your firmware & service manual needs please visit us at:

              www.copierfirmware.co.uk - www.printerfirmware.co.uk

              Comment

              • mga
                Copier Technician

                Site Contributor
                1,000+ Posts
                • Dec 2010
                • 1393

                #8
                Re: c6003, c6004 pcu

                Originally posted by copier tech
                I agree the rebuild kits don't last.

                However the black & colour PCU look different so how can you fit a black as colour?
                I know you are right that what I always thought but a friend said to me it works also there is a user on here that does it all the time
                Regards Mark

                FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

                RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

                https://copierservices.simdif.com

                Comment

                • copier tech
                  Field Supervisor

                  5,000+ Posts
                  • Jan 2014
                  • 7931

                  #9
                  Re: c6003, c6004 pcu

                  Originally posted by mga
                  I know you are right that what I always thought but a friend said to me it works also there is a user on here that does it all the time

                  I have yet to try this.

                  So just to confirm what you are saying I only need to carry a xx04 K PCU and this will fit as colour & black on ALL the METIS models? (except C2xxx)
                  Let us eat, drink, and be merry, because tomorrow we may die!

                  For all your firmware & service manual needs please visit us at:

                  www.copierfirmware.co.uk - www.printerfirmware.co.uk

                  Comment

                  • UCPrint
                    Technician
                    • Oct 2012
                    • 24

                    #10
                    Re: c6003, c6004 pcu

                    Thanks for the feedback guys, i've got a couple of BK 04 PCU's arriving with me today so will give it a test at some point in the next week and let you know my results.
                    I had heard that it just fits straight in but you cant put the front cover back on because there is a slight shape difference.

                    Comment

                    • anothertech
                      Service Manager

                      Site Contributor
                      1,000+ Posts
                      • Nov 2007
                      • 1715

                      #11
                      Re: c6003, c6004 pcu

                      Originally posted by copier tech
                      I have yet to try this.

                      So just to confirm what you are saying I only need to carry a xx04 K PCU and this will fit as colour & black on ALL the METIS models? (except C2xxx)
                      No, you need to carry xx04 Black drum and xx04 Color drum.

                      Comment

                      • fshead
                        Service Manager

                        1,000+ Posts
                        • Jan 2009
                        • 2356

                        #12
                        Re: c6003, c6004 pcu

                        Originally posted by copier tech
                        I agree the rebuild kits don't last.

                        However the black & colour PCU look different so how can you fit a black as colour?
                        Curious are these Ricoh rebuild kits or chinese knockoffs?
                        I have swapped a couple chinese drums on low meter return with a small scratch or pin hole and so far so good..
                        Not heavy volume accounts so i feel safer doing that..

                        Comment

                        • mga
                          Copier Technician

                          Site Contributor
                          1,000+ Posts
                          • Dec 2010
                          • 1393

                          #13
                          Re: c6003, c6004 pcu

                          Originally posted by anothertech
                          No, you need to carry xx04 Black drum and xx04 Color drum.
                          I thought the same but try it please let me know out come

                          MPC4503 Print out dirty dot dot at center

                          #17
                          Regards Mark

                          FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

                          RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

                          https://copierservices.simdif.com

                          Comment

                          • copier tech
                            Field Supervisor

                            5,000+ Posts
                            • Jan 2014
                            • 7931

                            #14
                            Re: c6003, c6004 pcu

                            Originally posted by anothertech
                            No, you need to carry xx04 Black drum and xx04 Color drum.
                            OK, so if I can fit an XX04 K to colour why do I need to carry colour PCU when I can fit a black!?
                            Let us eat, drink, and be merry, because tomorrow we may die!

                            For all your firmware & service manual needs please visit us at:

                            www.copierfirmware.co.uk - www.printerfirmware.co.uk

                            Comment

                            • mga
                              Copier Technician

                              Site Contributor
                              1,000+ Posts
                              • Dec 2010
                              • 1393

                              #15
                              Re: c6003, c6004 pcu

                              Originally posted by copier tech
                              OK, so if I can fit an XX04 K to colour why do I need to carry colour PCU when I can fit a black!?
                              The bk pcu is a little more money but has a larger lube bar and 400k life colour is 270k
                              Regards Mark

                              FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

                              RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

                              https://copierservices.simdif.com

                              Comment

                              Working...