Calibrate print colour poor

[Hong1007]

Dear all,

May i ask after i do a memory clear (all), the calibrate for print colour is very poor. May i know how to slove it.

Many thanks

[DonPedro]

Re: Calibrate print colour poor

Hi
After clear all you need to enter values from non-default page. Next step is initialize TD sensors, force line adj., toner density adj.

[COPIERMAN]

Re: Calibrate print colour poor

all memory clear is last thing you what to do. also if you don't have information sheet from when it was first setup then every setting has to be readjusted. You didn't say how many copies on the color units. Could had been they are wore out and need to be replace. Good luck you might have cause yourself more headache.

[copiertec]

Re: Calibrate print colour poor

Dear all,

May i ask after i do a memory clear (all), the calibrate for print colour is very poor. May i know how to slove it.

Many thanks

For what reason did you perform a memory clear all? Agreed with copierman... you may have just opened a can of crap.

[slimslob]

Re: Calibrate print colour poor

Hi
After clear all you need to enter values from non-default page. Next step is initialize TD sensors, force line adj., toner density adj.

The idiot will probably print the current non-default and try to us it.

[sandmanmac]

Re: Calibrate print colour poor

Dear all,

May i ask after i do a memory clear (all), the calibrate for print colour is very poor. May i know how to slove it.

Many thanks

download.jpg
That is all........

[keithxxiii]

Re: Calibrate print colour poor

35dwmx.jpg

[DonPedro]

Re: Calibrate print colour poor

The idiot will probably print the current non-default and try to us it.

I hope he knows where is placed non-default sheet in copier.

[slot]

Re: Calibrate print colour poor

i have sent you a PM

[copier tech]

Re: Calibrate print colour poor

Run force line position C then A SP2111

If you really need to do an all clear be sure to back up the nvram first.

[Polarbear]

Re: Calibrate print colour poor

Not to add fuel to the fire, but I am yet to see a Memory all clear fix ANYTHING!

[aktasson]

Re: Calibrate print colour poor

The problem is not just the action with memory clear all. The technician has the possibility to save/backup the nv-ram data to the sd card. That should the first job from a technician to backup/prinout the data/nondefault parameters. If you realize the problem has not been resolved, then you can restore the nv-ram data back from the sd card. That is feasible for everyone.
SP 5-824 NVRAM Data Upload
SP 5-825 NVRAM Data Download
Why you do a mem clear all by calibrate/colour problem that is a puzzle