SR3000

[slimslob]

Re: SR3000

Look around in your Service Program modes. It should be somewhere around SP6-111 or thereabout. Some trial-and-error will be required.

For the SR 3020 it is SP 6134 for the staple position and SP 6135 for the fold position. Adjustments are only + or - 6 mm.

[slimslob]

Re: SR3000

In the future it would be extremely helpful if you specified what the model of the main frame was.

[DRichard]

Re: SR3000

just got sr3000 booklet maker but the 2 staples are not in the center , there off center buy about an inch ? i remember the higher models you could go into menu and adjust left and right , but on this model ??

Look around in your Service Program modes. It should be somewhere around SP6-111 or thereabout. Some trial-and-error will be required.

[top copy]

just got sr3000 booklet maker but the 2 staples are not in the center , there off center buy about an inch ? i remember the higher models you could go into menu and adjust left and right , but on this model ??