Ricoh MP C3003 sc101-01 when copying from glass

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Klydon
    Trusted Tech

    100+ Posts
    • Mar 2009
    • 243

    #16
    Re: Ricoh MP C3003 sc101-01 when copying from glass

    I have had this happen before once or twice and I believe it was the ribbon cable both times. (One time had an obvious crack in it once you got a look at it).

    When trying to make a copy of something on the glass, watch to see if the light cuts out perhaps when it is supposed to be on for scanning. Pretty much tells you the ribbon cable has a crack in it someplace.

    Comment

    • copyaction
      Senior Tech

      Site Contributor
      500+ Posts
      • Oct 2007
      • 991

      #17
      Re: Ricoh MP C3003 sc101-01 when copying from glass

      Originally posted by Klydon
      I have had this happen before once or twice and I believe it was the ribbon cable both times. (One time had an obvious crack in it once you got a look at it).

      When trying to make a copy of something on the glass, watch to see if the light cuts out perhaps when it is supposed to be on for scanning. Pretty much tells you the ribbon cable has a crack in it someplace.
      Do you happen to have the part number?

      Comment

      • copyaction
        Senior Tech

        Site Contributor
        500+ Posts
        • Oct 2007
        • 991

        #18

        Comment

        • Phil B.
          Field Supervisor

          10,000+ Posts
          • Jul 2016
          • 22798

          #19
          Re: Ricoh MP C3003 sc101-01 when copying from glass

          Hey Bud,

          get the part #

          and post a request in this forum: https://www.copytechnet.com/forums/the-parts-room/

          but I do think you got this one 'fingered' out!

          Comment

          • copyaction
            Senior Tech

            Site Contributor
            500+ Posts
            • Oct 2007
            • 991

            #20
            Re: Ricoh MP C3003 sc101-01 when copying from glass

            Originally posted by Phil B.
            Hey Bud,

            get the part #

            and post a request in this forum: https://www.copytechnet.com/forums/the-parts-room/

            but I do think you got this one 'fingered' out!
            Thanks, I will give it a try.

            Comment

            • slimslob
              Retired

              Site Contributor
              25,000+ Posts
              • May 2013
              • 37489

              #21
              Re: Ricoh MP C3003 sc101-01 when copying from glass

              Point to point shows 3 different part numbers for connections between the scanner unit and the SIO board.
              1. D1495202
              2. D1495204
              3. D1495206

              There is no D1495201 shown.

              If you know the connector number that the cable was connected to on the SIO board you can find it on the point to point.

              Comment

              • TonerMunkeh
                Professional Moron

                2,500+ Posts
                • Apr 2008
                • 3865

                #22
                Re: Ricoh MP C3003 sc101-01 when copying from glass

                Scanner P2P.jpg
                It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

                Hit it.

                Comment

                • mga
                  Copier Technician

                  Site Contributor
                  1,000+ Posts
                  • Dec 2010
                  • 1393

                  #23
                  Re: Ricoh MP C3003 sc101-01 when copying from glass

                  Originally posted by copyaction

                  I think it is D149 5207
                  Regards Mark

                  FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

                  RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

                  https://copierservices.simdif.com

                  Comment

                  • copyaction
                    Senior Tech

                    Site Contributor
                    500+ Posts
                    • Oct 2007
                    • 991

                    #24
                    Re: Ricoh MP C3003 sc101-01 when copying from glass

                    Originally posted by mga
                    I think it is D149 5207
                    That is what I ordered today, I will let everyone know for sure when it comes in.

                    Comment

                    • slimslob
                      Retired

                      Site Contributor
                      25,000+ Posts
                      • May 2013
                      • 37489

                      #25
                      Re: Ricoh MP C3003 sc101-01 when copying from glass

                      Originally posted by TonerMunkeh
                      [ATTACH=CONFIG]45202[/ATTACH]
                      My Point to Point is old and did not show the LED connection.

                      Comment

                      Working...