Ricoh mpc400 please wait message on panel

Collapse
X
Collapse
 
  • Page of 3
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • solorajder
    Trusted Tech
    • Jul 2010
    • 106
    #31
    Re: Ricoh mpc400 please wait message on panel

    Originally posted by Phil B.
    wow sead? you mean said ...

    whata loser.
    Yes I mean said.....sorry but English is not my native language.

    whata loser? I don't understand.... you mean what a loser... [emoji23][emoji23][emoji23]

    Sent from my G8441 using Tapatalk

      Comment

      • slimslob
        Retired

        Site Contributor
        25,000+ Posts
        • May 2013
        • 37490
        #32
        Re: Ricoh mpc400 please wait message on panel

        Originally posted by solorajder
        Yes I mean said.....sorry but English is not my native language.

        whata loser? I don't understand.... you mean what a loser... [emoji23][emoji23][emoji23]

        Sent from my G8441 using Tapatalk
        If English is not your native tongue then type in your native tongue and use an online translator.

          Comment

          • Phil B.
            Field Supervisor

            10,000+ Posts
            • Jul 2016
            • 22798
            #33
            Re: Ricoh mpc400 please wait message on panel

            Originally posted by slimslob
            If English is not your native tongue then type in your native tongue and use an online translator.
            There is an online spell checker here. You can tell when a word is misspelled..it has a red squiggly line under the misspelled word you can view before you send your comment.
            It's like that in all major apps.
            I'm sorry if users don't know that simple FACT.
            Sent from my SM-G960U using Tapatalk

              Comment

              • UNICORNico
                Trusted Tech

                250+ Posts
                • May 2018
                • 308
                #34
                Re: Ricoh mpc400 please wait message on panel

                Originally posted by Jama
                Thanks for suggestion, the problem seams to be controller/BICU, will be fixing same and see whether the problem will be sorted. Today I replaced new hdd but nothing happened, still showing ''please wait message''
                It is expected, despite the changes the system does not start.
                If you know of a "Reballing" service, they will examine the BICU. To avoid the expense of changing the PCB.
                "ALL WILL BE WELL" The battle cry that most inspires me to follow, from the DC's Comic character that I admire the most. And I feel satisfied with being better every day, and with using Gnu-Linux as my usual Operating System.Apologies for my English, it's not my mother tongue and I'm helping the translator.

                  Comment

                  • copier tech
                    Field Supervisor

                    5,000+ Posts
                    • Jan 2014
                    • 8144
                    #35
                    Re: Ricoh mpc400 please wait message on panel

                    Originally posted by Jama
                    [ATTACH=CONFIG]46216[/ATTACH]The mpc400 displaying please wait message/panel, I disconnected fax options, hdd, also checked RAMS, but still shows please wait message on panel, at some point it displayed sc997, could this be firmware in need? any link/site for firmware down?
                    Had a few issues like this over the years.

                    Reconnected your HDD first or fit a new one.

                    Next try updating the firmware if you find it won't boot from your firmware SD card then re-seat all connections & ram etc if that doesn't work I would recommend from personal experience you replace the controller.
                    Let us eat, drink, and be merry, because tomorrow we may die!

                    For all your firmware & service manual needs please visit us at:

                    www.copierfirmware.co.uk - www.printerfirmware.co.uk
                    ​

                      Comment

                      Previous 1 2 3 template Next
                      Working...