banding ricoh 5100

[hernan]

Hi everyone, I have a Ricoh pro c5110s, and this printing fails, can someone help me? I don't know what it can be, thank you very much.

[TonerMunkeh]

Re: banding ricoh 5100

Hallo,

Can you print off a PM counter list and upload it please?

[hernan]

Re: banding ricoh 5100

Bands look the same in all 4 colors. Thank you for your supportive response. Attached as requested!!

[TonerMunkeh]

Re: banding ricoh 5100

Hello again,

That's the commissioning status, not the PM counter. When you first go into SP modes, there's an option that says something like "PM Counter / Manual New Unit Set" on the same page as System SP, Printer SP etc. Go to "counterlist printout" in there and upload that one please.

With the banding affecting all colours could be ITB, PTR or fuser, but we'll see when you upload that file.

[hernan]

Re: banding ricoh 5100

sorry !! uploaded again.

[slimslob]

Re: banding ricoh 5100

On the Commissioning report I am seeing a lot of 0 remaining item that are showing as having been replaced. To me that indicates a production machine that is being highly under used and doing a lot of very small jobs for a production machine. I have a feeling that your toner consumption is higher than what is specified in the Product Support Guide and you are using a lot of waste toner bottles.

[hernan]

Re: banding ricoh 5100

My client has a small printing company and does not make a large number of copies, he has a very good print quality in full lengths and photographs, but these marks come out in half tones, I don't know the causes.

[copier tech]

Re: banding ricoh 5100

Hi everyone, I have a Ricoh pro c5110s, and this printing fails, can someone help me? I don't know what it can be, thank you very much.

Have you tried running DEMS?

Execute DEMS (SP3-040-001)

When the gap between development
roller and OPC drum changes, color
inconsistency will occur due to changes
in toner adhesion. CH-C1 Pro supports
DEMS

[copier tech]

Re: banding ricoh 5100

Bands look the same in all 4 colors. Thank you for your supportive response. Attached as requested!!

Your firmware is a little out of date, not that would really help your issue but might be worth a try loading the latest package.

[JaysOnTheEDGE]

Re: banding ricoh 5100

Are your test prints off the engine or the fiery? i ask because i had a similar banding issue with a customer running a gray background you could see a magenta band it it ended up being a setting in the fiery that was causing the issue.

Run the DEMS as mentioned before Check the ITB belt guide mylar, it gets toner build up.

Almost looks like your getting shock or jitter. lots can cause that especially in the fusing and transfer area. Especially if running a coated or thicker paper.

[anothertech]

Re: banding ricoh 5100

Are those streaks running lead to trail?

[bat]

Re: banding ricoh 5100

This is a Shock jitter, difference in the rotation speed of the ITB motor and Registration motor. Read RTB No.: RD137039a.

[slimslob]

Re: banding ricoh 5100

This is a Shock jitter, difference in the rotation speed of the ITB motor and Registration motor. Read RTB No.: RD137039a.

You can't attach that RTB? Either that or provide the corresponding TSB number used by Ricoh-USA?

[copier tech]

Re: banding ricoh 5100

This is a Shock jitter, difference in the rotation speed of the ITB motor and Registration motor. Read RTB No.: RD137039a.

Search this document for RD137039a

https://mega.nz/file/BAdAzJgL#V6tmrz...CpeVmmmVy5xeek

[mga]

Re: banding ricoh 5100

Hi everyone, I have a Ricoh pro c5110s, and this printing fails, can someone help me? I don't know what it can be, thank you very much.

Same same lines in all colours I would check ptr assy and wax bar in there