1018d not loading toner

[Jomama46]

If you didnt replace the mag roll gears,it will be back. Believe me when I tell you.

[ash_572]

the dev section tht i replaced with had gears on them anyway. its not like it had the same gear and mag roller in it.

[Jomama46]

the dev section tht i replaced with had gears on them anyway. its not like it had the same gear and mag roller in it.

I know, it has three gears, what I'm saying is there are 2 gears on the mag roll above the dv unit that drives the dev unit. These 2 gears are the problem.

[petrus]

4 me it better change whole unit of pcu unit.you save your time and less headache.this same as the Af1022/27.the padler roller breaks.

[johnny32]

Double check the drive gears in the dev tank had a few these go

[ash_572]

il let u know if this fault comes back in again. neway iv got another problem on a AP 3800 tht ive just posted. check it out.