Re: mp c2011sp error sc547-02
check well also the various door switch , that can generate "zero cross signal"
mp c2011sp error sc547-02
Collapse
X
-
Re: mp c2011sp error sc547-02
SC547-02 is a Zero cross error (relay contact fault). Check fuses on PSU. Replace the PSU.Leave a comment:
-
Re: mp c2011sp error sc547-02
you have to check fusing section, if damage replace,then you must reset the code,like says in manual.Leave a comment:
-
mp c2011sp error sc547-02
hi,
I have face problem MP C2011SP SC547-02. As per the technical bulletin i have check connection in between PSU (AC) and CONTROLLER Board.
Still the same. Please advise me anybody face same issue..... Latest firmware has been updated.
Thanks
senaka
Leave a comment: