Faint Black on Ricoh MPC2003 color pattern, copy and printout.

Collapse
X
Collapse
 
  • Page of 3
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • Pixtech Frameworks
    Trusted Tech

    100+ Posts
    • May 2020
    • 238
    #31
    Re: Faint Black on Ricoh MPC2003 color pattern, copy and printout.

    Hello Guys,
    I have found the solution, ITB was the cause of the faint black for weeks. An ITB from an old mpc5503 was swapped to MPC2003 and forced toner supply 3times and everything was ok, Attached is a copy of color pattern. Thank you all for your various contributions.
    Attached Files

      Comment

      • Andrzej
        Junior Member
        • Jul 2022
        • 7
        #32
        Re: Faint Black on Ricoh MPC2003 color pattern, copy and printout.

        Originally posted by Pixtech Frameworks
        Hello Guys,
        I have found the solution, ITB was the cause of the faint black for weeks. An ITB from an old mpc5503 was swapped to MPC2003 and forced toner supply 3times and everything was ok, Attached is a copy of color pattern. Thank you all for your various contributions.
        Jeśli to był ITB, to po co trzy razy wymuszony toner w trybie SP ? Ten przypadek jest prawie w każdym takim modelu z serii MP C2003 i MP C2011. Może jest moda do regulacji gęstości tonera w developingu ?

          Comment

          • slimslob
            Retired

            Site Contributor
            25,000+ Posts
            • May 2013
            • 37489
            #33
            Re: Faint Black on Ricoh MPC2003 color pattern, copy and printout.

            Originally posted by Andrzej
            Jeśli to był ITB, to po co trzy razy wymuszony toner w trybie SP ? Ten przypadek jest prawie w każdym takim modelu z serii MP C2003 i MP C2011. Może jest moda do regulacji gęstości tonera w developingu ?

            Post your answer in English in the future. We have been getting an excessive amount of spam in foreign languages lately and I almost flagged you as a spammer.

              Comment

              • Oze
                Ricoh Fanboy

                1,000+ Posts
                • Jul 2008
                • 1663
                #34
                Re: Faint Black on Ricoh MPC2003 color pattern, copy and printout.

                Originally posted by slimslob
                Post your answer in English in the future. We have been getting an excessive amount of spam in foreign languages lately and I almost flagged you as a spammer.
                Agreed...the forum doesn't auto translate..!!!

                  Comment

                  • slimslob
                    Retired

                    Site Contributor
                    25,000+ Posts
                    • May 2013
                    • 37489
                    #35
                    Re: Faint Black on Ricoh MPC2003 color pattern, copy and printout.

                    Originally posted by Oze
                    Agreed...the forum doesn't auto translate..!!!
                    And a lot of senior techs don't like to use an online translator. As for me, in the past I would rather use Google Translate than try to decipher broken English. Lately though we have been getting far too many spam posts many of which are in a foreign language.

                      Comment

                      • Andrzej
                        Junior Member
                        • Jul 2022
                        • 7
                        #36
                        Re: Faint Black on Ricoh MPC2003 color pattern, copy and printout.

                        Originally posted by Pixtech Frameworks
                        Hello Guys,
                        I have found the solution, ITB was the cause of the faint black for weeks. An ITB from an old mpc5503 was swapped to MPC2003 and forced toner supply 3times and everything was ok, Attached is a copy of color pattern. Thank you all for your various contributions.
                        Hello,I have a similar problem, I replaced the entire imaging unit (developing drum), according to the manufacturer's procedure.I did toner dispensing, then developer initiation and finally print and copy calibration.The image improved, but it took 3 weeks, about 1,500 black and white and 800 color prints were made.The faint print returned, SP 3201-001 went to 3.5V from 2.7 V. Then I did the same and after some time the faint (no contrast) print returns.Will clearing the Memory Engine help?

                          Comment

                          • davel
                            Technician

                            1,000+ Posts
                            • Oct 2011
                            • 1104
                            #37
                            Re: Faint Black on Ricoh MPC2003 color pattern, copy and printout.

                            No.

                              Comment

                              Previous 1 2 3 template Next
                              Working...