Cannot reach Ricoh IS 2416 via IP adress

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • KenB
    Geek Extraordinaire

    2,500+ Posts
    • Dec 2007
    • 3944
    #16
    Re: Cannot reach Ricoh IS 2416 via IP adress

    Originally posted by slimslob
    That is why I am thinking that the scanner IP and the printer IP are different. I have installed and worked on systems set up that way.
    If I remember, the old Aficio 270 had the two separate ports.
    “I think you should treat good friends like a fine wine. That’s why I keep mine locked up in the basement.” - Tim Hawkins

      Comment

      • slimslob
        Retired

        Site Contributor
        25,000+ Posts
        • May 2013
        • 37490
        #17
        Re: Cannot reach Ricoh IS 2416 via IP adress

        Originally posted by KenB
        If I remember, the old Aficio 270 had the two separate ports.
        No but it did not support SMB scan to folder. Only TWAIN pull scanning and ScanRouter V2. Scan router is not compatible with any current Windows. Normally required a dedicated XP computer or NT4/4.1 server.

          Comment

          • Drivee
            Trusted Tech

            250+ Posts
            • Nov 2020
            • 322
            #18
            Re: Cannot reach Ricoh IS 2416 via IP adress

            Thank you all for comments.
            As I say, I am unable to ping printer IP via cmd. I did install copier via network, I just run universal driver from Ricoh web and printer print well.
            The IP of computers are in same network. So, printer is 192.168.0.233 and lap top is 192.168.0.101, so I should be able to ping. Anyway, I did not realize that models is so old so it will be used for printing and copy until service need to be made and them we will scrap this one. It is time to replace this old machine!

              Comment

              Previous 1 2 template Next
              Working...