MP C2503 no pick up

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • luca72
    Field Supervisor

    1,000+ Posts
    • Oct 2017
    • 1778
    #16
    Re: MP C2503 no pick up

    Originally posted by GIUBOSS
    Try swapping with the other paper tray: 54. D1492773
    PULLEY: PICKUP: MECHANICAL ROLLER CLUTCH

    He says that have replace the pick up station assy. With another.
    "I'll be back"

      Comment

      • GIUBOSS
        Service Manager

        Site Contributor
        1,000+ Posts
        • Jul 2013
        • 1435
        #17
        Re: MP C2503 no pick up

        Originally posted by luca72
        He says that have replace the pick up station assy. With another.

        Forget about it

          Comment

          • copier tech
            Field Supervisor

            5,000+ Posts
            • Jan 2014
            • 8144
            #18
            Re: MP C2503 no pick up

            I went back with a paper feed drive unit I try lift motor then ran 500 duplex prints without a single jam. This was made of of about 10 runs & I opened & closed the tray to try & replicate the issue again hopefully one of those units was the cause.
            Let us eat, drink, and be merry, because tomorrow we may die!

            For all your firmware & service manual needs please visit us at:

            www.copierfirmware.co.uk - www.printerfirmware.co.uk
            ​

              Comment

              • GIUBOSS
                Service Manager

                Site Contributor
                1,000+ Posts
                • Jul 2013
                • 1435
                #19
                Re: MP C2503 no pick up

                Originally posted by copier tech
                I went back with a paper feed drive unit I try lift motor then ran 500 duplex prints without a single jam. This was made of of about 10 runs & I opened & closed the tray to try & replicate the issue again hopefully one of those units was the cause.


                Don't trust this: 24.AW500040
                (x2)
                PUSH SWITCH: SW
                1AG-550: 10MA

                  Comment

                  Previous 1 2 template Next
                  Working...