MPW 5100

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • leprosydog777
    Technician
    • Jan 2018
    • 33

    #1

    MPW 5100

    Hello i have a ricoh mpw5100 runs fine for a while than has sc406 and add toner problem i replaced id sensor drum drum blade and dv still after runs for a while continue has sc406 seen flow on dv build up on the left side so clean adj doctor blade still has problem any ideas
  • slimslob
    Retired

    Site Contributor
    25,000+ Posts
    • May 2013
    • 37489

    #2
    Re: MPW 5100

    Originally posted by leprosydog777
    Hello i have a ricoh mpw5100 runs fine for a while than has sc406 and add toner problem i replaced id sensor drum drum blade and dv still after runs for a while continue has sc406 seen flow on dv build up on the left side so clean adj doctor blade still has problem any ideas
    Have you checked that the machine is setting level?

    Comment

    • leprosydog777
      Technician
      • Jan 2018
      • 33

      #3
      Re: MPW 5100

      Originally posted by slimslob
      Have you checked that the machine is setting level?

      absolutley i even raised the left side to even out
      i also check doctor blade height level to have even flow of dv
      when cheat door and watch toner flow even across except left side

      Comment

      • leprosydog777
        Technician
        • Jan 2018
        • 33

        #4
        Re: MPW 5100

        the problem was new dev unit never heard back

        Comment

        Working...