Many problems with Aficio MP C305 SPF

[hsnslh]

Hello,
I have a problem updating System/Copy: E44 when reading from SD card.
Now I get stuck on "Waiting for firmware update data..." message every time I restart the machine, even if I don't insert the SD card into the slot.
I had some errors before the update, like address book error, authentication module and websys.mod, home web page shows "404 Not Found" (and still having them)
Now I can't access SP mode (beeps every time I try)
The printer is in an unused state.
I read in some threads that I need to change the NVRAM. I have no idea where can I find them on the board, and how to proceed.
If you have any idea, I appreciate your help.
Thanks.

[anothertech]

Re: Many problems with Aficio MP C305 SPF

Boot the machine without the SD card, then

Clear modes, 1,4,3 ,clear/stop, clear/stop, clear/stop, reboot

[hsnslh]

Re: Many problems with Aficio MP C305 SPF

Hello
thank you for your reply
I've already done this, it only clears the E44 error
The update message appears again whenever I restart

[anothertech]

Re: Many problems with Aficio MP C305 SPF

Then download the System firmware again and put in on a different SD card. Try it again.

[sandmanmac]

Re: Many problems with Aficio MP C305 SPF

Apparently you refuse to give up until you've rendered it entirely unusable!

Maybe you should start a 4th new thread about this!!

Need a firmware for Aficio MP C305 SPF

Stuck in Admin password setting

[hsnslh]

Re: Many problems with Aficio MP C305 SPF

Is there any problem about this ?

[hsnslh]

Re: Many problems with Aficio MP C305 SPF

Then download the System firmware again and put in on a different SD card. Try it again.

Thank you for your reply
Already done this but didn't work.

[UNICORNico]

Re: Many problems with Aficio MP C305 SPF

Hello,
I have a problem updating System/Copy: E44 when reading from SD card.
Now I get stuck on "Waiting for firmware update data..." message every time I restart the machine, even if I don't insert the SD card into the slot.
I had some errors before the update, like address book error, authentication module and websys.mod, home web page shows "404 Not Found" (and still having them)
Now I can't access SP mode (beeps every time I try)
The printer is in an unused state.
I read in some threads that I need to change the NVRAM. I have no idea where can I find them on the board, and how to proceed.
If you have any idea, I appreciate your help.
Thanks.

My intuition tells me that you turned off the device during the firmware update...
Probably you got an error and you did not wait for the automatic restart that it usually does when it detects errors.
I'm afraid you'll have to replace the NVRam.

[hsnslh]

Re: Many problems with Aficio MP C305 SPF

Hello and thank you for your reply
Can you tell me where the NvRam is located so that I can replace it
Best regards

[slimslob]

Re: Many problems with Aficio MP C305 SPF

Read the damned service manual.

[Ales]

Re: Many problems with Aficio MP C305 SPF

Hello and thank you for your reply
Can you tell me where the NvRam is located so that I can replace it
Best regards

nvram are located on the controller board

[anothertech]

Re: Many problems with Aficio MP C305 SPF

Hello and thank you for your reply
Can you tell me where the NvRam is located so that I can replace it
Best regards

If you have to ask, you shouldn't be working on this machine. There are so many pitfalls, no way you'll get through it.

[Zaxxon]

Re: Many problems with Aficio MP C305 SPF

Read the damned service manual.

Next question will be: where can I find the manual?

[GIUBOSS]

Re: Many problems with Aficio MP C305 SPF

part number : D1179590
NV-RAM